Ang PLC Single-Acting Pulse Width Control (PWM) Synchronous Lifting System usa ka advanced electro-hydraulic lifting solution nga gidisenyo alang sa high-precision synchronous lifting, pagpaubos, pagtimbang, ug pagpahimutang sa bug-at nga mga istruktura ug kagamitan. Paghiusa PLC intelihenteng kontrol, modulasyon sa gilapdon sa pulso (PWM) teknolohiya, ug pressure ug displacement closed-loop feedback, gisiguro sa sistema ang matag hydraulic cylinder nga molihok nga adunay talagsaon nga katukma samtang gipadayon ang balanse nga pag-apod-apod sa karga.
Gidisenyo alang sa gikinahanglan nga mga proyekto sa engineering, ang sistema kaylap nga gigamit alang sa pagpuli sa bridge bearing, pag-alsa sa tulay, pag-instalar sa bug-at nga ekipo, structural jacking, pagmentinar sa imprastraktura, ug mga aplikasyon sa pag-alsa sa industriya.
Anaa sa 4-punto, 8-punto, 12-punto, 16-punto, ug 24-point synchronization configurations, ang sistema mahimong ipasibo aron matubag ang lainlaing mga kinahanglanon sa proyekto.
Paggamit sa advanced PLC control nga adunay pressure ug displacement feedback, ang sistema nag-synchronize sa daghang mga hydraulic cylinder nga adunay talagsaon nga katukma.
Ang mga bentaha naglakip:
Pagkatukma sa Pagbalhin: ≤0.2 mm
Katukma sa pag-synchronize: ≤0.5 mm
Ang sistema padayon nga nagmonitor sa cylinder displacement ug hydraulic pressure pinaagi sa high-precision sensors. Ang PLC awtomatik nga nag-adjust sa agos sa lana sa matag silindro, pagsiguro sa dungan nga paglihok sa tibuok proseso sa pagbayaw.
Lakip sa mga benepisyo:
Ang hydraulic pump output gi-regulate gamit Pulse Width Modulation (PWM) teknolohiya, nagtugot sa tukma nga pag-adjust sa hydraulic flow sumala sa mga kinahanglanon sa pagbayaw.
Kung itandi sa naandan nga hydraulic system, Ang kontrol sa PWM naghatag:
Ang mga integrated pressure sensor ug displacement transducers padayon nga nagmonitor sa matag lifting point.
Ang sistema awtomatiko:
Ang user-friendly nga touch-screen interface nagtugot sa mga operator sa pagmonitor ug pagkontrol sa tibuok proseso sa pagbayaw.
Ang mga gimbuhaton naglakip:
Daghang mga bahin sa kaluwasan ang nagsiguro nga kasaligan nga operasyon sa panahon sa kritikal nga mga proyekto sa pagbayaw.
Ang mga gimbuhaton sa kaluwasan naglakip:
Ang PLC Synchronous Lifting System naglangkob sa:
| butang | Espesipikasyon |
|---|---|
| Sistema sa Pagkontrol | PLC Intelligent Control |
| Pamaagi sa Pagkontrol | Pulse Width Modulation (PWM) |
| Hydraulic Circuit | Pressure & Displacement Closed Loop |
| Pinakataas nga Presyon sa Trabaho | 70 MPa (700 Bar) |
| Pagkatukma sa Pagbalhin | ≤0.2 mm |
| Katukma sa pag-synchronize | ≤0.5 mm |
| Pagtrabaho nga Boltahe | AC 380V / 50Hz (Tulo ka hugna sa lima ka wire) |
| Interface sa Operasyon | Interface sa Tawo-Makina (HMI) |
| Sistema sa Alarm | Madungog & Biswal nga Alarm |
| Uri sa Silindro | Single-Acting Hydraulic Cylinder |
| Modelo | Mga Punto sa Pag-synchronize | Gahum sa Motor | Boltahe | Presyon sa Pagtrabaho | Kapasidad sa Tangke sa Langis | Mga sukat (L × W × H) |
|---|---|---|---|---|---|---|
| KET-SHM-4 | 4 Mga punto | 2.2 kW | 220V | 70 MPa | 130 L | 780 × 680 × 1210 mm |
| KET-SHM-8 | 8 Mga punto | 2.2 kW | 380V | 70 MPa | 130 L | 780 × 680 × 1210 mm |
| KET-SHM-12 | 12 Mga punto | 2.2 kW | 380V | 70 MPa | 130 L | 780 × 680 × 1210 mm |
| KET-SHM-16 | 16 Mga punto | 5.5 kW | 380V | 70 MPa | 200 L | 780 × 680 × 1210 mm |
| KET-SHM-24 | 24 Mga punto | 5.5 kW | 380V | 70 MPa | 200 L | 800 × 750 × 1210 mm |
Ang PLC Hydraulic Synchronous Lifting System kaylap nga gigamit sa heavy lifting ug structural engineering nga mga proyekto, lakip:
Ingon usa ka propesyonal nga tiggama sa hydraulic lifting equipment ug synchronized lifting system, Naghatag kami og kompleto nga mga solusyon sa pagbayaw alang sa mga kompanya sa pagtukod sa tulay, engineering contractors, industriyal nga mga tanom, and infrastructure projects worldwide.
Ang among mga bentaha naglakip:
Each system is thoroughly tested before delivery to ensure exceptional accuracy, kaluwasan, and reliability in demanding lifting applications.
A PLC synchronous lifting system is an intelligent hydraulic lifting system that uses a programmable logic controller (PLC) to synchronize multiple hydraulic cylinders. It automatically controls cylinder movement to achieve precise lifting, pagpaubos, and load balancing.
PWM (Pulse Width Modulation) is a control method that regulates hydraulic flow by adjusting the output of the hydraulic control valves. This enables smoother operation, mas taas nga positioning accuracy, mas paspas nga tubag, ug gipaayo nga kahusayan sa enerhiya.
Naghatag ang sistema sa katukma sa pag-synchronize sa ≤0.5 mm, samtang ang cylinder displacement accuracy moabot ≤0.2 mm, gihimo kini nga angay alang sa taas nga katukma nga mga aplikasyon sa pag-alsa sama sa pagpuli sa bridge bearing.
Ang hydraulic nga sistema naglihok sa labing taas nga presyur sa pagtrabaho sa 70 MPa (700 Bar), paghatag og igong gahum alang sa pagpangayo og bug-at nga pag-alsa ug pagposisyon nga mga proyekto.
Suporta sa standard nga mga modelo:
Ang mas taas nga kapasidad ug hingpit nga gipahiangay nga mga sistema sa multi-point magamit kung gihangyo.
Ang sistema gidisenyo alang sa single-acting hydraulic cylinders, lakip ang mga ultra-low-height nga mga silindro nga sagad gigamit sa pag-alsa sa tulay ug pagpuli sa bearing. Custom configurations can be developed for other cylinder types.
Oo. The PLC system can monitor and record key operating parameters such as pressure, pagbakwit, synchronization status, and alarms. Data logging and customized reporting functions are available based on project requirements.
Oo. We offer OEM and customized engineering solutions, lakip:
Our systems are widely used in:
Oo. We provide complete technical support, including equipment selection, system design, installation guidance, commissioning assistance, operator training, and after-sales service for projects worldwide.
Nangita ug kasaligan PLC Hydraulic Synchronous Lifting System Manufacturer?
Contact us today for technical consultation, project support, OEM customization, ug pabrika-direkta nga presyo. Our engineering team can design a customized multi-point synchronous lifting solution to meet your bridge construction, infrastructure, or heavy industrial lifting requirements.
Email: sales@longloodtool.com
Telepono:+86-13599531763
Address: Unit 502, salog 5, Building B, # 1 workshop, Sentro sa Pagsuporta sa Mga Part sa Auto Industry (hugna iv), Lungsod ang Guankou, Distrito sa Jimei, Xiamen,Fujian,China
Makontak ka namo sa sulod 1 adlaw sa pagtrabaho.